Holiday Trinket 2013 in Japanese 8 in 2 Captive 1

Yes, I know the closures on this are rather embarrassing, but I'm so very happy that I finally, finally, (wait, wait for this....) learn how to read "Maillese", that's if that is a word, or a language:-)

Japanese 8 in 2 Captive 1 is a weave that I had wanted to do almost from day one when I started mailling, because ....  well, it looked easy enough, and yet so pretty.

Well, that was over 4 years ago.  I tried many times; none worked; googled all over; no samples.  The most recent attempt was about 6 months ago; failed.  I gave up.

Then, I saw this discussion by CMB on MAIL.  OMG!!  What can I say?  If only I learned how to "read"!  I totally misunderstood what the "Captive" means......  so sad:-(

OK, so this is what I made last night; a shameless copy of Zlosk's weave entry, along with my WIP photos.

 

 

et, voila!

It's looking so, so pretty!!  And feels nice too with the weight of the stainless steel and bronze rings in a very rigid form.

Specs are exactly as what CMB said in the discussion thread: stainless steel 18 swg, 3/16" and bronze 18 swg, 1/4".  But I think I made the mistakes in using saw cut rings, which looked to be little smaller AR than the machine cut rings.  I absolutely did not "mind the gaps", LOL!!

These sure make very pretty holiday trinkets, don't you think? :-)

btw, I also made a little sibling for this trinket; wanna see?  Come over here.

More pix?  Please visit my Picasa web album.

#

#  #

#    #

#  #

#

...

Celtic Rose Sheet Bracelet in Hexagonal Tessellation

I just realized that I've not recorded my Celtic Rose Hex Sheet bracelet in my blog yet!  Guess I was too excited (and exhausted) when I finally got done with it:-)

I made this for one of the 2012 weave challenges on MWW, which I really enjoyed immensely.  Not that I made it through every one of them, but I did try my best, and I learned quite a bit.

So, this lacy little weave, Celtic Rose Sheet Hexagonal Tessellation, wasn't too difficult to make.  The key is to understand where the connection points are from one "rose unit" to the next.  I'm a bit more "free" when it comes to the ring sizes, I noticed that so long as I can fit the small ring just inside of a medium ring, the rest was more or less "negotiable".  It may also helped when I gave up on actually making a sheet which could be more daunting than a straight bracelet form, more or less:-)

btw, this is not exactly my first try at the weave.  Below is my first try:

I actually like this color contrasts better, a more distinct, tri-color look; but the large copper rings are wee bit too large, making the units a little floppy; also with copper rings at such high AR, they are kind of weak, and that is not a good thing.....

Comparing to the final ring combination here:

So much more better, right?  Hee hee:-)

And it lays nicely on the wrist with a low profile, very form-fitting, closes with a handmade toggle bar connecting to the last rose unit on the other end of the bracelet, making the whole thing almost seamless.

In case anyone is interested, here's what I used: JB 18swg 5/16", Bronze 18swg 7/32", BA 19swg 5/32".

Or, skip the DIY steps, just come over to my online studio DaisyKreates.com and pick this one up for yourself, or your loved one!  Easy, peasy:-)  In case of sold-out and you'd still like one made by me, please drop me a note for a custom made piece just for you :-)



:*:*:*:

One More Night at Denny's

Ha ha ha, yup, one more of these pretty little bracelets, One Night at Denny's!

This one is for my dear friend Margaret's mom's upcoming birthday celebration.

Selected by Margaret's two boys, the original version was a rather jingly one, with lots of bells, and it went to my friend Sara.  Now Sara is always ready for her next belly dancing party:-)

Margaret likes this bracelet for her mom with beads instead of bells.  Equally colorful and eye-catching, but much more quiet....

What do you think?  Comments/critiques welcome!!

I think I will make another one, this time with rings more inline with BrassAnvil's original specs on M.A.I.L., I like the contrasts between the different gauges of rings, and the way it gladly welcomes any beads, bells, charms, dangles, etc. along with the fun!!

...

'33' Watch Bracelet - BSG Inspired

'33' - As in, "Every 33 minutes, the Cylons find us."



'33' is the very first episode of BSG season 1, and my favorite!  Talk about being on the edge of my seat, feeling the extreme fatigue of having no sleep for 5 days straight running for your life....  I was exhausted just from watching it.

front view

When I set out for a design that captures the episode, in my head I had the scenes of multiple watches, clocks, digital, analog, flashing, all marked at 33 minutes.  Do you see it?

back view

side view

Made in European 4-in-1 in circular form with Persian edging.  The bright aluminum, copper, and bronze rings give this 'watch face' an interesting asymmetry.  It's clearly not half-half, but more of a 5/7 split.  The front and back sides are slightly different in looks because of the severe tension held by the double ring Persian edging.  I improvised the smaller rings on the outer rim to stabilize the plane.

Now comes the fun part, the watch band.  I want something that looks a lot like a common metal watch band, while still coordinates with the watch face.  I stayed within Euro family but this time in scale form as in 8-in-2, plus small double ring connectors running down each edge.



However, the rings used here are with much smaller ARs than required for typical Euro 8-in-2.  That's why the left strip slightly overlap the right strip, allowing the center strip to look more dominant.



Then comes the closure.  I tried so many, but none looked right.  They are either too tight, too loose, too flimsy, or too bracelet-like.

As this "watch" sat in idle for months waiting for a closure, I stumbled upon a box clasp on Rio Grande.  This simple box clasp not only is the perfect size, 2-connector style, but it has "cut corners', or octagon shaped!!  That's totally BSG!



btw, I had tried to make a box clasp myself using wire.  Not working, even with memory wire.  The spring mechanism is the key to a box clasp, and I still haven't found a way to duplicate that function with wire.  A bit disappointed... Well, no fear.  As a prototype in shape and size, I'm still pleased.

So, what do you think?  Does it look like a watch that's permanently pointing at 33?



Postscript:  Since the watch face has sat on my table for a while, it's starting to tarnish naturally.  Notice the slightly different colors of bronze and copper?  The large double rings are bronze and tarnish bit slower than copper in the back.  Didn't plan on it, but now I know:-)



Note to readers:

I create the BSG-inspired line of jewelry solely as a challenge to myself to design/create within a theme. I'm fascinated by the storyline and totally enjoyed watching the entire series from day 1 back in 2003. These jewelry pieces are not endorsed by anyone related to BSG, and are not intended to infringe upon
any of BSG rights. I'm just an admirer showing appreciation for the best TV program EVER! If any official BSG representative feels otherwise, please let me know; the last thing I want from this line is to upset the BSG creation.

One Night at Denny's

This little guy begs for attention! Not only bursting with colors, but jingling like crazy too!

Yep, that's the name of the weave, One Night at Denny's. No clue how it came about, but sure is fun to make. I think the half-, semi-Trizantine knots look like little pots of flowers, see them?

I named this bracelet "One very jingly Night at Denny's" because it's crazily jingly. These bells are small, but high decibel. Too much for you? Well then take a look at the "light" version and the "quiet" version in here.

Specs:

All rings are 18 SWG, 1.2mm, from Blue Buddha's sample packs; they're great! I get so much use out of them. The big connector rings are bronze; "flower pots" are anodized aluminum, AR 4.1; bells are connected "Shaggy Loops" style with jeweler's brass rings. I don't know what material the bells are, just that they jingle all right.

And last but not least, the split tail Fish Hook is my own design, out of 16 SWG Nb wire, hand forged then anodized.

__

More Hourglass: Dodecahedron and Truncated Icosahedron

I was already plenty giddy with an Hourglass tetrahedron; then I read Ferrousknight's tutorial on M.A.I.L., and saw the photos in the gallery. Forget food and sleep, I've got to make myself some of these!!


Dodecahedron is a fun and rather quick one to make. I forget how many rings... only that I had to disassemble my first HG tetrahedron, reused the rings here; and then it's still not enough... Finally had to pull out my stash of 18 gauge copper wire to make up the rest. Ideal AR s/b about 7.5 to 8.3; my copper rings went way over that; can't find the right size mandrel around my house; this is the best I had at the time.

Stats:
Bright aluminum rings are R18 (that's 18swg, 11/32" ID) ALUM from Blue Buddha, 18 gauge, WD 1.2 mm, actual ID 9.5 mm, AR ~8. Copper rings are made from 18 gauge wire, WD 1.1 mm, ID about 10 mm, yeah, I know, bit too big, that's why they all have 3-ring connectors, compared to 2 on the BA rings.
Pretty neat, wouldn't you say?

OK, here's the truncated icosahedron. I had to google around to learn what that is.

Here's one made with Hourglass units. Looks complicated? Not really, once I got the concept, it's rather simple and elegant, almost zen.

So my hand cut rings leave lots room for improvement, the AR's were all over the place, copper and brass wires have lots spring back, and the last roll of aluminum wire was so weak that it kinked like every other inch.

But I had loads of fun! Believe me when I say practice makes perfect; this little boy has over 500 rings! (something like 540 in total, according to the math, but don't hold me to it....)

Now I'm obsessed. I'm making a chainmaille soccer ball, in black and white rings, yay!!!

Shaggy Loops Earrings

Fun earrings made with left over rings from practice kits. All rings are in 18 gauge, big and small; the beads at the very bottom are sterling silver.

Now only if I had a earring display stand .... hum, maybe a custom stand like this one, wouldn't that be nifty?! Here's the how-to on the stand; must give it a try.